Forged Clean-Out Block Blank | Forged Structural Block for Extrusion Equipment

Forged Clean-Out Block Blanks are medium-load Structural Components used in extrusion press clean-out mechanisms and material handling stages. They provide support, connectivity, and structural rigidity while ensuring fatigue resistance and long-term stability.

Forged from Alloy Steel and optionally rough-machined, these components are suitable for B2B engineering applications, avoiding small tooling-like components.

Typical Applications

• Extrusion press clean-out mechanisms
• Material handling or support blocks
• Medium-load structural assemblies in extrusion systems

Typical Specification

Fully compatible with our open-die forging + Heat Treatment + rough machining capabilities.

Typical Materials

• 42CrMo / AISI 4140 – Standard alloy steel
• 34CrNiMo6 / AISI 4340 – For higher fatigue or torsional strength
• Optional: 40CrNiMoA, 30CrNiMo8

Manufacturing Process

1. Open-Die Forging – Dense internal structure, optimal grain alignment.
2. Heat Treatment – Quenching and tempering for toughness.
3. Rough Machining (Optional) – Reference faces for later assembly.
4. Finish Machining (Optional) – Precision tolerances up to ±0.01 mm.

Illustrations are for reference purposes. Final geometry and specifications are defined by customer-approved engineering requirements.

Mechanical & Functional Characteristics

• Medium-load structural rigidity
• Stable under repeated extrusion cycles
• High fatigue resistance
• Designed as non-tooling, engineering-grade block

Inspection & Quality Control

  Related Forged Products

• Forged Extrusion Stem Shaft
• Forged Container Base / Ring Support
• Forged Dummy Block Base / Support Block
• Forged Pressure Ring / Pressure Plate